Colt L4-1795cc 1.8L SOHC (1994)
Brake Pad: Service and Repair
Front
1. Remove approximately 1/3 of brake fluid from master cylinder.
2. Raise and support vehicle, then remove tire and wheel assembly.
Fig 2 MR31S & Dual Pin Floating Caliper Disc Brake Assembly
3. Remove guide pin or lower slide pin, then lift caliper body upward and secure with wire.
4. Remove inner shims, anti-squeak shims, brake pad assemblies and pad clips from support mounting.
5. Press caliper piston into caliper bore with suitable tool.