Colt L4-1795cc 1.8L SOHC (1994)
Tachometer: Testing and Inspection
Tachometer Inspection
1.
Insert paper clip into the engine revolution speed detection terminal provided in the engine compartment, and connect the engine tachometer to the
inserted paper clip.
CAUTION:
As the tachometer is negative grounded, do not connect battery conversely to prevent damaging transistor and diode.
NOTE:
For tachometer inspection, use of a fluxmeter-type engine tachometer is recommended. (Because a fluxmeter only needs to be clipped to the
high tension cable.)
2.
Connect the engine tachometer and compare the engine tachometer and tachometer readings. Replace tachometer if difference is excessive.
Standard value:
1,000 ± 100 rpm
3,000 + 100 rpm
- 200 rpm
5,000 + 100 rpm
- 375 rpm
6,000 + 100 rpm
- 450 rpm
