Colt L4-1795cc 1.8L SOHC (1994)
Coolant Temperature Sensor/Switch (For Computer): Testing and Inspection
Unit Inspection
To check, remove engine coolant temperature gauge unit from intake manifold.
Engine Coolant Temperature Gauge Inspection: Step (1)
Standard Resistance of Engine Coolant Temperature Gauge Unit
1. Immerse unit in 70°C (158°F) water to measure resistance.
Standard value: 104 ± 13.5 Ohms
Engine Coolant Temperature Gauge Inspection: Step (2)
2. After checking, apply the specified adhesive around the thread of engine coolant temperature gauge unit and install on the intake manifold.
Specified sealant: MOPAR Part No. 4318034 or equivalent.