Colt L4-1795cc 1.8L SOHC (1994)
Trailing Arm: Service and Repair
Fig. 22 Trailing Arm Removal
TRAILING ARM REPLACE
1. Remove trailing arm assembly as shown, noting following:
a. When removing speed sensor do not allow pole piece to touch rotor surface or other parts.
b. Support lower arm with a suitable jack, then remove lower arm to trailing arm connection.
2. Reverse procedure to install noting following:
a. Insert a feeler gauge into space between speed sensor pole piece and rotor, then adjust bracket so clearance is 0.012-0.035 inch.
NOTE: Do not allow pole piece to touch surface of rotor or other parts.