dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel Filler Door - Cable Comes Loose|Page 2961 > < Fuel Filler Door - Cable Comes Loose|Page 2955
Page 1
background image

Fuel Door: All Technical Service Bulletins
Fuel Filler Door - Cable Comes Loose

Models

1989 B2 Vehicles

Subject

Fuel Filler Door Cable Comes Loose

Index

BODY

Date

January 23, 1989

No.

23-01-89

P-106

(C23-59)

BODY CODE LEGEND

B2 - Colt 3-Door

SYMPTOM/CONDITION

On some vehicles, built prior to July 4, 1988, the fuel filler door cable may become loose and disengage from the hook.

DIAGNOSIS

This condition may be caused by excess sealant around the hook installation hole at the inner quarter panel.

PARTS REQUIRED

1

Hook, Fuel Filler Door

MB02 3245

REPAIR PROCEDURE

1.

Disconnect the cable from the hook, as shown below.

2.

Remove the excess sealant from around the hook installation hole.

NOTE:

TAKE CARE NOT TO DAMAGE THE PAINT WHEN REMOVING THE EXCESS SEALER.

3.

If required, install a new fuel filler door hook as described on page 23-51 of Volume 1 in the 1989 Colt/Summit Import Service Manual.

POLICY:

Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:
Labor Operations No.

23-41-38-90

. . . . . . . . . . . .

0.2 Hrs.

Fuel Filler Door - Cable Comes Loose|Page 2961 > < Fuel Filler Door - Cable Comes Loose|Page 2955