Colt Wagon 2WD L4-1468cc 1.5L SOHC (1989)
Figure 10
-
Between the front door belt line molding and the outer door panel (Figure 10).
Figure 11
-
Around the front door opening (Figure 11).
Figure 12
-
Between the front door trim and the inner weatherstrip (Figure 12).
2.
Road test the vehicle to determine the overall noise level of the vehicle with the tape in place. Systematically remove the masking tape from each
of the four areas, one at a time and road test the vehicle after each section of tape is removed.
3.
When a source of wind noise is determined, tape that area again and drive the vehicle to confirm the source of the noise.
4.
Repair the wind noise as outlined in Repair Procedure B.