Colt Wagon 2WD L4-1468cc 1.5L SOHC (1989)
Fig. 148 Automatic Seat Belt System (Part 2 Of 2)
1.
On hatchback models, proceed as follows:
a. Remove scuff plate, then upper and lower quarter trim.
b. Remove front pillar trim, then the front belt rail trim.
c. Remove headlining.
2.
On sedan models, proceed as follows:
a. Remove front and rear scuff plates.
b. Remove center pillar upper and lower trim panels.
c. Remove front pillar trim panel, then the front belt rail trim.
d. Remove headlining.
3.
On all models, remove shoulder belt tongue plate.
4.
Disconnect release switch connector.
5.
Disconnect seat belt wiring harness connector.
6.
Remove outer casing mounting bolts.
7.
Remove motor mounting bolts.
8.
Remove guide rail mounting bolts, then the track and motor assembly.
9.
Reverse procedure to install.