dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

M/T - Production Change/Reverse Gear Noise Reduction|Page 2244 > < Fluid - M/T|Specifications
Page 1
background image

Synchronizer Hub: Technical Service Bulletins
M/T - Production Change/Reverse Gear Noise Reduction

Models

1989 B1, B2, & B3 Bodies

Subject

Component Revision To Eliminate Reverse Gear Noise KM200, KM210, or KM220 Series Transaxles

Index

TRANSMISSION

Date

February 12, 1990

No.

21-03-90

(C21-27-9)

P-307
BODY CODE LEGEND B1 - COLT STATION WAGON B2 - COLT 3-DOOR B3 - COLT VISTA

TRANSAXLE COMPONENT REVISION On a trial production basis from January 5 to January 31, 1989, revised components were installed in
KM200, KM210, and KM220 series transaxles in an effort to reduce reverse gear noise. This effort proved successful, and therefore these components
were put into production permanently on March 21, 1989.

Figure 1

Figure 1 below illustrates the components which have been revised. The attached chart lists the new component part number and, where applicable, the
part number of the component which is being replaced.

M/T - Production Change/Reverse Gear Noise Reduction|Page 2244 > < Fluid - M/T|Specifications