Conquest TSI L4-2555cc 2.6L SOHC Turbo (1986)
Radiator Fan Relay: Testing and Inspection
The fan motor relays are located on the right front wheel house.
Fig. 12 Relay terminal identification. 1985-87 Conquest w/intercooler
1.
With relay disconnected, use suitable ohmmeter to check continuity between terminals 1 and 2. Continuity should not exist.
Fig. 11 Testing thermo sensor(s). 1985-88 Conquest w/intercooler
2.
Check continuity between terminals 3 and 4. Continuity should exist.
Fig. 12 Relay terminal identification. 1985-87 Conquest w/intercooler
3.
Using 12 volt battery, apply positive voltage to terminal 3 and negative to terminal 4, then check continuity between terminals 1 and 2. Continuity
should exist.
4.
If relay does not perform as outlined above, replace.