D150 1/2 Ton Pickup 2WD L6-225 3.7L VIN H 1-bbl (1983)
Fig 10 Caliper And Outboard Shoe Retainer Flange
Fig. 7 Bending Outboard Pad Retaining Flange
Fig 12 Attaching Shoe To Caliper Fingers With C-clamp
NOTE: No free play between brake shoe flanges and caliper fingers should exist (which might cause brake shoe rattle).
-
If free play is evident by vertical shoe movement after installation, remove shoe from caliper and bend flanges to create slight interference fit
to eliminate all vertical free play when shoe is installed.
-
Install shoe after above modification, if necessary, by snapping shoe into place with fingers or with light "C" clamp, protect new lining from