D150 1/2 Ton Pickup 2WD L6-225 3.7L VIN H 1-bbl (1983)
Fig. 12 Pitman shaft seals & bearings. Model 605
Fig. 27 Pitman shaft bearing installation. Model 605
1. If pitman shaft needle bearing was removed, install with lettered edge facing outward and flush with bottom of counter bore with a suitable tool.
2. Install pitman shaft oil seal, washer and snap ring.
Fig. 9 Lower thrust bearing & adjuster assembly. Model 605
Fig. 10 Stub shaft seals & snap ring. Model 605