D250 3/4 Ton Pickup 2WD V8-318 5.2L VIN R 4-bbl (1982)
FIGURE 1-C - ENGINE COMPARTMENT WIRING
5.
Coat the bare blade terminal of the engine overlay harness PN 4362295 liberally with Mopar multi-purpose grease PN 4318063 and snap
into cavity #11 of the engine side of the bulkhead connector (Figure 1-C).
FIGURE 2-A - TERMINAL END OF BULKHEAD CONNECTOR (INSTRUMENT PANEL SIDE)
B.
Instrument Panel Harness PN 4362284
1.
Insert two bare terminals from instrument panel overlay harness, PN 4362284, into the instrument panel side of the bulkhead connector as
shown in Figure 2-A and outlined below:
a.
Grey with black tracer wire into cavity #11.
b.
Dark green wire into cavity #12.
FIGURE 2-B - TERMINAL END OF IGNITION SWITCH CONN. (PART OF INSTRUMENT PANEL WIRING)
