Fuel System - Engine Vapor Lock - Technical Service Bulletin
FIGURE 3-B - BODY WIRING HARNESS
3.
At the engine compartment, route the body wiring harness, PN 4362286, through the existing clips for the main body harness to the
bulkhead area.
NOTE:
DUE TO VARYING WHEEL BASE LENGTHS, EXCESS WIRING MAY EXIST. WRAP EXCESS WIRING
BETWEEN THE TWO CLIPS REFERENCED IN FIGURE 3-C, AND SECURE WITH TIE WRAPS, PN 6015756, IN
TWO (2) PLACES.