D50/Power Ram 50 L4-2350cc 2.4L SOHC (1992)
Throttle Valve Cable/Linkage: Adjustments
Fig. 7 Throttle pressure adjustment
An incorrect throttle pressure setting will cause incorrect line pressure readings even though line pressure adjustment is correct. Always inspect and
correct throttle pressure adjustment before adjusting line pressure.
1.
Insert gauge pin tool No. C-3763 or equivalent between throttle lever cam and kickdown valve, Fig. 7.
2.
By pushing in on tool, compress kickdown valve against its spring so throttle valve is completely bottomed inside valve body.
3.
As force is being exerted to compress spring, turn throttle lever stop screw with Allen wrench until head of screw touches throttle lever tang with
throttle lever cam touching tool and throttle valve bottomed. Ensure adjustment is made with spring fully compressed and valve bottomed in valve
body.