D50/Power Ram 50 V6-2972cc 3.0L SOHC (1990)
Camshaft Sprocket Installation
^
Using the special tool, tighten the camshaft sprocket mounting bolt.
Head Gasket Removal
^
Use a scraper to remove the cylinder head gasket from the cylinder block.
Head Gasket Identification
CAUTION: Take care that no foreign material gets into the coolant or oil passages.
a
Do not confuse cylinder head gaskets of each engine, which have identification marks on them to prevent mistakes.
b
Lay the cylinder head gasket on cylinder block with the identification mark at front top.
^
# 16 Cylinder head gasket
^
# 15 Cylinder head assembly