D50/Ram 50 L4-2350cc 2.4L SOHC (1992)
Ignition Switch: Testing and Inspection
Automatic Transmission
Inhibitor Switch Location
Models w/Automatic Transaxle
1.
Disconnect inhibitor switch connector.
2.
Operate selector lever and check continuity between center terminal of inhibitor switch and the transmission case.
3.
Continuity should exist with selector lever in P and N position, but should not exist with selector lever in R, D, 2 or L position.
4.
If test results are not as specified, adjust or replace inhibitor switch.
