D 150 Pickup V6-239 3.9L (1992)
6.
Torque all the flange nuts to 407-475 N-m (300-350 ft.lbs.) in an alternating pattern, Figure 1.
7.
Visually verify to see if the wheel is centered properly. Check tire air pressure to make sure it is properly inflated.
8.
Repeat the procedure for other side of vehicle.
9.
Road test vehicle to confirm your repair.
AS A COURTESY TO THE CUSTOMER, PLEASE PROVIDE THEM WITH THE CONE NUTS FOR FUTURE USE (EX. TIRE OR WHEEL
REPLACEMENT).
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE
Labor Operation No. 22-40-01-93
. . . . . . . . . . . . . . . . . . . . .
0.3 Hrs.
FAILURE CODE: 51 - Improperly installed
