D 150 Pickup V8-360 5.9L VIN W (1987)
ASSEMBLY. FAILURE TO DO SO MAY RESULT IN HOSE KINKING.
f.
Slide the shortened 4" convolute over the shortened 6" hose, and install from the fuel pump outlet tube to the reservoir inlet nipple
(Figure 4-B). Clamp with PN 6500651 at each end.
4.
On 4 x 4 Models
a.
Install return hose assembly, PN 4418005, from the fuel reservoir return nipple to the chassis tube, and clamp with PN 6500650 at each
end.
b.
Slide both 6" pieces of convolute sleeve, PN 4279993, over each 5/16" x 8" hose, PN 4203576.
c.
Install one 5/16" x 8" hose, PN 4203576, (with convolute sleeve PN 4279993) from the fuel pump outlet tube to the reservoir inlet
nipple, and clamp with PN 6500651 at each end (Figure 4-B).
d.
Install the other 5/16" x 8" hose, PN 4203576, (with convolute sleeve PN 4279993) from the reservoir outlet nipple to the carburetor
fuel tube, and clamp with PN 6500651 at each end (Figure 4-B).
FIGURE 6
5.
Tighten all hose clamps to 10 inch pounds.
6.
Type in Authorized Modification Label, PN 4275086, as shown in Figure 6 and attach near VECI label.
7.
Reconnect battery. Start the engine and inspect the entire system for fuel leaks and proper wire and hose routing.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Labor Operation No.
All - 14-70-17-93 . . . . . . . . . . .
2.1 Hrs.
FAILURE CODE:
AM - Authorized Modification
Parts List - Vapor Lock Package - 20, 30 & 35 Gallon Fuel Tank
PARTS LIST
VAPOR LOCK PACKAGE
1986 & 1987 D & W MODEL TRUCK - 20 GALLON FUEL TANK
PACKAGE PART NO. 4364384
QTY.
PART NAME
PART NO.
1
Gauge/Pump Unit Assembly
4075484