D 250 Pickup V6-239 3.9L (1989)
Fig 1 Cast Iron Master Cylinder
Fig 3 Cast Iron Master Cylinder (Exploded View)
1. Position master cylinder on vehicle.
2. Install attaching nuts and tighten to specification 23 Nm (200 in lb).
3. Connect push rod to brake pedal linkage.
4. Connect brake tubes and tighten to specification 19 Nm (170 in lb).
5. Bleed brake system being sure to maintain the master cylinder fluid level.
For additional information see Notes, Warnings, and Hints. See: Fundamentals and Basics