Shifter Detent Spring: Gear Slippage in Low Temperatures (211189)
rust.
9.
Apply a light coat of wheel bearing grease P/N 4318064 evenly to the entire length of the exposed input shaft splines. Apply a light coat of
multipurpose grease P/N 4318063 to the inside of the pilot bushing bore. Be sure all excessive lubricant is removed.
10.
Install the transmission. Check and adjust the transmission lubricant level as required.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No. 21-00-06-90 . . . . . . . . . . . . . . . . . . 1.5 Hrs. NP2500-5 Speed Transmission
21-00-06-60 . . . . . . . . . . . . . . . . . . 2.8 Hrs. Optional 4X4 Equipped
FAILURE CODE:
58 - Internal Defect