dodge Workshop Repair Guides

Dodge D 350 Pickup V8-360 Workshop Service and Repair Manuals

Voltage Signal > < Diagram Information and Instructions|Page 1767
Page 1
background image

Vehicle Speed Sensor: Service and Repair

NOTE:  

The vehicle speed sensor is located on the extension housing of the transmission on 2WD models. It is located on the transfer case on 4WD
models.

REMOVAL

1.

Raise and support vehicle.

2.

Disconnect the electrical connector from the sensor.

3.

Remove (unscrew) the speedometer cable from the sensor.

4.

Loosen the sensor mounting nut.

5.

Remove the sensor.

INSTALLATION

1.

Install new sensor into speedometer adapter.

2.

Tighten sensor mounting nut.

3.

Connect electrical connector to sensor.

4.

Connect the speedometer cable.

5.

Lower the vehicle.

Voltage Signal > < Diagram Information and Instructions|Page 1767