Workshop Manuals Factory service & repair Dodge
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Dodge D 350 Pickup V8-360 5.9L VIN I (1985)01 · Relays and Modules
01 · Diagnostics

Starter Relay: Testing and Inspection

Make
Dodge
Model
D350 D 350 Pickup
Engine
V8-360 5.9L VIN I
Year
1985
Section
Relays and Modules - Starting and Charging › Starter Relay › Testing and Inspection
Relays and ModulesTesting and Inspection
Starter Relay: Testing and Inspection – Dodge D 350 Pickup V8-360 5.9L VIN I (1985)

Starter Relay: Testing and Inspection

1.

Place transmission in Neutral and apply parking brake.

2.

Check for battery voltage between starter relay battery terminal and ground.

3.

Connect jumper wire on starter relay between battery and ignition terminals.

4.

If engine does not crank, connect a second jumper wire to starter relay between ground terminal and good ground and repeat test.

5.

If engine cranks in step 4, transmission linkage is misadjusted or neutral safety switch is defective.

6.

If engine does not crank in step 4, starter relay is defective.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

Parts & tools for this job For 1985 Dodge D350 5.9L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.