Dakota 2WD L4-153 2.5L VIN K FI (1989)
Solid Mount Accessory Bracket
19. Fasteners MUST BE TIGHTENED IN SEQUENCE and to specified torque as follows:
(a) Tighten bolt No.1 to 3 Nm (30 in. lbs.) torque.
(b) Tighten nut No.2 and bolt No.3 to 54 Nm (40 ft. lbs.) torque.
(c) Tighten bolts No.1 (second tightening), No.4 and 5 to 54 Nm (40 ft. lbs.) torque.
(d) Tighten bolts No.6 and 7 to 54 Nm (40 ft. lbs.) torque.
20. Install the generator and A/C compressor. Tighten compressor mounting bracket bolts to 27 Nm (20 ft. lbs.) torque.
21. Install the accessory drive belts.
22. Connect the negative cable to the battery.