Dakota 2WD L4-153 2.5L VIN K FI (1989)
Differential Lock: Service and Repair
Fig. 5 Disconnect Housing Cover Assembly
1.
Remove disconnect housing cover assembly attaching bolts, then the cover and gasket.
2.
Remove E-clip from shift motor housing and shaft, then remove shift motor and fork.
3.
Remove O-ring and shift fork pads.
4.
Clean and inspect parts. If any parts are worn or damaged, replace as necessary.
5.
Reverse procedure to install, noting the following:
a.
When installing disconnect housing cover assembly, carefully guide the shift fork into shift collar groove.
b.
Torque cover attaching bolts to 10 ft. lbs.