Dakota 2WD L4-2.5L VIN P (2001)
Fig.8 Engine-To-body Ground Strap Remove/Install - Typical
1. Remove the nut and washer that secures the left engine-to-body ground strap eyelet terminal to the weld stud on the left side of the lower plenum
panel.
Fig.9 Engine-To-body Ground Strap Remove/Install
2. On this engine only, remove the nut and washer that secures the left engine-to-body ground strap eyelet terminal to the stud on the left rear corner
of the engine cylinder head.
3. Remove the engine-to-body ground strap(s) from the engine compartment.
INSTALLATION
Exhaust System-to-body Ground Strap