Dakota 2WD L4-2.5L VIN P (2001)
4. Align the hinges on the bottom of the ash receiver door with the hinge pins on the bottom of the housing.
5. Using hand pressure, snap the hinges of the ash receiver door onto the hinge pins of the housing.
CAUTION: Be certain that the free end of the push/push latch spring on the ash receiver door is inserted into the slotted hole in the ash receiver
housing to the left of the push/push latch lever before completing the following step or the spring may be damaged.
6. Using hand pressure, spread the ash receiver housing far enough to engage the guide/stop pins on the ash receiver door into the slot on each side of
the housing.
7. Check the operation of the push/push latch of the ash receiver.
8. Reinstall the ash receiver into the instrument panel lower bezel. (Refer to 23 - BODY/INSTRUMENT PANEL/ASH RECEIVER -
INSTALLATION).