dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Interior Moulding / Trim|Service and Repair > < Diagram Information and Instructions|Page 6056
Page 1
background image

Console: Description and Operation

OVERHEAD CONSOLE

Overhead Console

The overhead console for this model includes two front-mounted reading and courtesy lamps, a sun-glasses storage bin, universal transmitter and
either a standard paperclip or an optional compass mini-trip computer.

The overhead console is secured with two snap clips at the rear and a single screw at the front to the overhead console mounting bracket. The front
of the overhead console mounting bracket is secured to the roof header near the windshield with two screws, and the rear of the bracket is secured
with double- faced tape to the inside surface of the roof panel. A single electrical connection joins the overhead console wire harness to the roof
wire harness.

Following are general descriptions of the major components used in the overhead console. See the owner's manual in the vehicle glove box for
more information on the use and operation of the various overhead console features.

Sunglasses Storage Bin

A sunglasses storage bin is included in the overhead console. The storage bin is located near the center of the overhead console and is held in the
closed position by a spring-loaded latch mechanism that is integral to the storage bin door. The interior of the bin is lined with a foam rubber
padding material to protect the sunglasses from being scratched. A damper spring is snapped onto the pivot shaft of the sunglasses storage bin
door. The damper spring engages two flats on the shaft and is anchored in a slot in the rear flange of the overhead console reading and courtesy
lamp housing to provide a smooth opening action and an open detent position for the storage bin unit.

The sunglasses storage bin and door unit is available for service replacement. The bin and door unit includes the spring-loaded latch mechanism,
the bin liner and the damper spring. If any of these components is damaged or faulty, the sunglasses storage bin and door unit must be replaced.

The sunglasses storage bin is opened by pressing the latch on the rear edge of the door towards the front of the vehicle, then pulling the bin
downward to the open detent position. The spring-loaded latch mechanism on the sunglasses bin door will automatically engage when the bin is
closed. See the owner's manual in the vehicle glove box for more information on the use and operation of the sunglasses storage bin.

Paperclip

A paperclip is standard equipment on the base version of the overhead console. The paperclip provides a convenient place for storage and easy
retrieval of notes, maps, toll tickets or stubs and other paper items that may be required or desired while driving. The paperclip is located near the
front of the overhead console and is secured in the overhead console housing by four screws.

The paperclip is available for service replacement, but it cannot be adjusted or repaired. If the paperclip is damaged or faulty it must be replaced.

Interior Moulding / Trim|Service and Repair > < Diagram Information and Instructions|Page 6056