Dakota 2WD L4-2.5L VIN P (2001)
5. Install and tighten the screw that secures the lower seat belt anchor plate to the B-pillar. Tighten the screw to 40 Nm (29 ft. lbs.).
6. Reinstall the trim onto the quarter inner panel.
7. Position the shoulder belt turning loop onto the height adjuster.
8. Install and tighten the screw that secures the shoulder belt turning loop to the height adjuster. Tighten the screw to 30 Nm (22 ft. lbs.).
9. Snap the trim cover over the front shoulder belt turning loop anchor plate to conceal the screw that secures the turning loop to the height adjuster.
10. Reconnect the battery negative cable.
