Dakota 2WD L4-2.5L VIN P (2001)
Clutch: Service and Repair
Rear Clutch
Disassembly
DISASSEMBLY
1. Remove fiber thrust washer from forward side of clutch retainer.
2. Remove input shaft front/rear seal rings.
3. Remove selective clutch pack snap-ring (Fig. 225).
4. Remove top pressure plate, clutch discs, steel plates, bottom pressure plate and wave snap-ring and wave spring (Fig. 225).
5. Remove clutch piston with rotating motion.
6. Remove and discard piston seals.