Dakota 2WD L4-2.5L VIN P (2001)
13. Install rear thrust washer on front planetary gear (Fig. 217). Use enough petroleum jelly to hold washer in place and be sure all four washer tabs
are seated.
14. Install front planetary gear on output shaft and in driving shell (Fig. 218).
15. Install front thrust washer on front planetary gear. Use enough petroleum jelly to hold washer in place and be sure all four washer tabs are seated.
16. Assemble front annulus gear and support, if necessary. Be sure support snap-ring is seated.
17. Install front annulus on front planetary (Fig. 218).