dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Shifter A/T|Description and Operation|Page 3346 > < Recall - A/T Ignition/Park Interlock|Page 3342
Page 1
background image

Shifter A/T: Description and Operation

DESCRIPTION

The gear shift mechanism provides six shift positions which are:
-

PARK (P)

-

REVERSE (R)

-

NEUTRAL (N)

-

DRIVE (D)

-

Manual SECOND (2)

-

Manual LOW (1)

OPERATION

Manual LOW 1 range provides first gear only. Overrun braking is also provided in this range. Manual SECOND 2 range provides first and second
gear only.
DRIVE range provides first, second third and over-drive fourth gear ranges. The shift into overdrive fourth gear range occurs only after the
transmission has completed the shift into D third gear range. No further movement of the shift mechanism is required to complete the 3-4 shift.
The fourth gear upshift occurs automatically when the overdrive selector switch is in the ON position. No upshift to fourth gear will occur if any of the
following are true:
-

The transmission fluid temperature is below 10° C (50° F) or above 121° C (250° F).

-

The shift to third is not yet complete.

-

Vehicle speed is too low for the 3-4 shift to occur.

-

Battery temperature is below -5° C (23° F).

Shifter A/T|Description and Operation|Page 3346 > < Recall - A/T Ignition/Park Interlock|Page 3342