Dakota 2WD V6-239 3.9L (1987)
Axle Lube (1 quart can)
REPAIR PROCEDURES
This procedure involves replacing the synchronizer assembly and axle lube.
Transfer Case
See appropriate service manual for replacement procedures.
Front Axle
1.
Using a suction pump, remove as much of the axle lubricant as possible.
NOTE:
IT IS NOT NECESSARY TO REMOVE THE DIFFERENTIAL COVER.
2.
Refill the axle with Mopar High Performance Synthetic Axle Lube, PN 4467707, as specified below.
"W" and "AW" Truck:
Fill to within 1/4" of the bottom of the fill plug hole (approximately 84 ounces).
N5 Dakota 4 x 4:
Fill to 1/2" below the bottom of the fill plug hole (approximately 40 ounces).
NOTE:
OVERFILL CAN RESULT IN LUBRICANT "FOAMING" AND/OR UNIT OVERHEATING.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Refer to Labor Operation Time Schedule for operation and time
