Dakota 2WD V6-239 3.9L Magnum (1996)
Mirrors: Service and Repair
Outside Rear View Mirror
REMOTE/MANUAL SIDE VIEW MIRROR REMOVAL
Remote/Manual Mirror
1. Loosen the mirror toggle control setscrew at the bezel.
2. Remove the cover plug and the mirror bezel retaining screw. Remove the mirror bezel from the door trim panel and the toggle control.
3. Remove the seal from the door aperture for access to the mirror retaining nuts.
4. Remove the mirror retaining nuts.
5. Remove the mirror from the door outside panel.
INSTALLATION
1. If necessary, clean the door panel to mirror base contact surface.
2. Position the mirror on the door outside panel with the studs inserted in the holes.
3. Install the mirror retaining nuts. Tighten the nuts to 7 Nm (65 in. lbs.) torque.
4. Install the mirror seal in the door aperture.
5. Position the mirror bezel over the toggle control and tighten the setscrew to 1 Nm (9 in. lbs.) torque.
6. Install the mirror bezel retaining screw. Tighten the screw to 2 Nm (17 in. lbs.) torque.
7. Install the mirror bezel retaining screw cover plug.
NON-REMOTE/MANUAL AND WIDE-VIEW MIRRORS REMOVAL
1. Remove the cover plug and the mirror bezel retaining screw. Remove the mirror bezel from the door trim panel.
Non-Remote/Manual And Wide-view Mirrors
2. Remove the seal for access to the mirror retaining nuts.
3. Remove the mirror retaining nuts.
4. Remove the mirror from the door outside panel.
INSTALLATION
1. If necessary, clean the door panel to mirror base contact surface.
2. Position the mirror on the door outside panel with the studs inserted in the holes.
3. Install the mirror retaining nuts. Tighten the nuts to 7 Nm (65 in. lbs.) torque.
