Dakota 2WD V6-239 3.9L Magnum (1996)
2.
Push the new seal (P/N 55256990) onto the retainer flange. Position the rear end of the seal flush to the rear end of the door/pillar drip rail seal
flange (figure 1).
CAUTION:
DO NOT USE A HAMMER TO INSTALL THE BODY-TO-DOOR-SEAL.
3.
Move forward to the A-pillar while seating the body-to-door-seal on the flange. The top of the seal must fit tight against the roof to provide a
proper water-tight seal and to have a good appearance.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
Seal, Body to Door - Replace (One or Both)
23-51-08-91
0.2 Hrs.
FAILURE CODE:
P8 - New Part