Dakota 2WD V6-239 3.9L Magnum (1996)
![background image](/dodge/dakota_2wd/v6-239_3.9l_magnum/Page-386001.png)
Radiator: Service and Repair
1. Disconnect battery ground cable, then drain cooling system.
2. Remove throttle cable at fan shroud, then unsnap and remove overflow tank from shroud.
3. Remove two fan shroud retaining clips and move toward engine. Shroud does not have to be removed from vehicle.
4. Disconnect transmission cooler lines, then remove upper and lower radiator hose clamps and hoses.
5. Remove two upper radiator support bolts and lift radiator out of vehicle.
6. Reverse procedure to install. Insert two bottom alignment pins into holes in lower support.