Dakota 2WD V6-3.7L (2009)
Front Bumper Reinforcement: Service and Repair
Front Bumper Reinforcement - Installation
INSTALLATION
1. Install the fog lamps (3) onto the bracket (4) and position the bracket onto the vehicle (1).
2. Connect the fog lamp electrical connector (2).
3. Install the three screws on the top of the bracket (2).
4. Install the three screws (3) on each side of the bracket (2).
5. Install the fascia. See: Front Bumper Cover / Fascia/Service and Repair/Front Bumper Fascia - Installation