dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Relays and Modules - HVAC > < Four Wheel Antilock Brake System
Page 1
background image

Electronic Brake Control Module: Service and Repair
Rear Wheel Antilock Brake System

Trim Panel

RWAL Controller

REMOVAL

1. Remove the trim panel, Data Link Connector (DLC) and knee blocker.
2. Remove bolts attaching module to the left side of the steering column support.
3. Disconnect wiring and remove module from vehicle.

INSTALLATION

1. Connect wiring to control module.
2. Position module on steering column support.
3. Install control module mounting bolts.
4. Install the knee blocker, DLC and trim panel.

Relays and Modules - HVAC > < Four Wheel Antilock Brake System