Dakota 2WD V8-318 5.2L Magnum (1995)
9. Assemble adjuster screw. Then install and engage adjuster screw in brake shoes.
CAUTION: Be sure the adjuster screws are installed on the correct brake unit. The adjuster screws are marked L (left) and R (right) for
identification.
10. Install adjuster lever and spring and connect adjuster cable to lever.
11. Install secondary shoe retainers and spring.
12. Install shoe spring.
-
Connect spring to secondary shoe first.
-
Then to primary shoe.
13. Verify adjuster operation. Pull adjuster cable upward.
-
Cable should lift lever and rotate start wheel.
-
Be sure adjuster lever properly engages start wheel teeth.
14. Adjust brake shoes to drum.