Dakota 2WD V8-318 5.2L Magnum (1995)
Fig 14 Rear Brake Antilock Valve Attachment
10. Remove line that connects antilock valve to combination valve.
11. Remove bolt attaching rear antilock valve to combination valve bracket.
12. Remove rear brake antilock valve from combination valve bracket.
REAR BRAKE ANTI LOCK VALVE INSTALLATION
1. Install antilock valve on combination valve bracket.
2. Install line that connects antilock valve to combination valve.
3. Install valve and bracket assembly on master cylinder mounting studs.
4. Install and tighten master cylinder stud nuts to 23-28 Nm (200-250 in lb) torque.
5. Attach ground wire to combination valve bracket.
6. Connect brake lines to master cylinder, antilock valve and combination valve.
7. Tighten brake line fittings to 16-23 Nm (140-200 in lb) torque.
8. Connect wire harnesses to antilock valve and combination valve.
9. Install and connect battery.
10. Bleed brake system.