Dakota 2WD V8-318 5.2L Magnum (1995)
Alignment: Service and Repair
Preliminary Inspection
1. Road test vehicle noting any abnormal steering or handling characteristics.
2. Ensure tires are the proper type, correctly inflated, properly balanced and same size on each axle.
3. Inspect ball joints, suspension arms, bushings and tie rods, and repair or replace any component that is damaged or excessively worn.
4. Ensure wheel runout is not excessive and bearings are properly adjusted.
5. Check suspension components for wear and correct tightening.
6. Jounce vehicle several times to settle suspension.
7. Place vehicle on suitable alignment rack following manufacturer's instructions. Remove hub cap and cotter pin, and attach alignment gauges to
wheel hub.
8. Check and correct alignment angles in the following sequence: camber and caster, and toe-in.