Dakota 2WD V8-4.7L (2008)
![background image](/dodge/dakota_2wd/v8-4.7l/Page-2731026.png)
1. Unsnap the trim cover (4) from the rear seat belt turning loop (3).
2. Remove the screw (5) that secures the seat belt turning loop to the upper C-pillar (1).
3. Remove the seat belt turning loop from the C-pillar.
4. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the upper C-pillar trim panel (2) to the C-pillar and then pull the
trim panel away from the C-pillar and remove the trim panel.
Lower
INSTALLATION
Club Cab, Without Rear Jumper Seats
1. Position the lower C-pillar trim panel (4) to the C-pillar and engage the retaining tabs that secure the trim panel to the C-pillar.
CAUTION: Keep the inner bottom end of the upper C-pillar trim panel away from the cab back trim panel when installing the upper
C-pillar trim panel to prevent scratching the back trim panel.
2. Install the upper C-pillar trim panel, See: Pillar Trim/C-Pillar Trim Panel-Installation.