Dakota 2WD V8-4.7L (2008)
3. Position the seat belt lower anchor to the mounting hole in the floor panel near the base of the C-pillar and Install the screw (6) that secures the
lower anchor to the floor panel. Tighten the screw to 39 Nm (29 ft. lbs.).
4. Position the lower C-pillar trim panel to the C-pillar (1) and engage the retaining tabs that secure the trim panel to the C-pillar.
CAUTION: Keep the inner bottom end of the upper C-pillar trim panel away from the cab back trim panel when installing the upper
C-pillar trim panel to prevent scratching the back trim panel.
5. Install the upper C-pillar trim panel, See: Pillar Trim/C-Pillar Trim Panel-Installation.
6. Install the rear door sill scuff plate, See: Scuff Plate/Service and Repair/Door Sill Scuff Plate - Installation.
7. Install the outer front seat belt retractor cover, See: Cover-Outer Front Seat Belt Retractor/Installation.
Quad Cab