Dakota 2WD V8-4.7L (2008)
8. Install the brake line (1) at the wheel cylinder (2).
9. Lower the vehicle and remove the support.
10. Bleed the brake system See: Brake Bleeding.
Rear Brake Hose - Axle To Frame
REAR BRAKE HOSE - AXLE TO FRAME
1. Install the brake hose (3) to the bracket and then install the clip (1).
2. Tighten the brake line (2) into the brake hose. Tighten to 16 Nm (21 ft.lbs.).
3. Install the brake line (2) to the axle stud.
4. Install the brake lines (1&3) into the brake hose (2).
