Dakota 2WD V8-4.7L (2008)
Fuel Injector: Service and Repair
Fuel Injector - Installation
INSTALLATION
1. Install fuel injector(s) (3) into fuel rail assembly (4) and install retaining clip(s) (2).
2. If same injector(s) is being reinstalled, install new o-ring(s).
3. Apply a small amount of clean engine oil to each injector o-ring. This will aid in installation.
4. Install fuel rail. See: Fuel Rail/Service and Repair/Fuel Rail - Installation
5. Start engine and check for fuel leaks.