Dakota 2WD V8-4.7L (2008)
2. If equipped with manual transmission, align transmission flange (1) and propeller shaft reference marks. Install new flange bolts (2) and tighten to
115 Nm (85 ft. lbs.).
3. If two piece propeller shaft, align center bearing (1) with reference marks on center bearing bracket and tighten bolts (2) to 54 Nm (40 ft. lbs.).
4. Align reference marks on propeller shaft and pinion flange. Install new companion flange (1) bolts and tighten to 115 Nm (85 ft. lbs.)
CAUTION: Failure to follow these instructions may result in a driveline vibration.