Dakota 2WD V8-4.7L Flex Fuel (2009)
NOTE: If the epoxy bonded washers are separated from the hinges, the door may need to be adjusted.
6. If removed, install the epoxy bonded washers.
7. Loosely install the two nuts (2) and the two bolts (1) that secure the door to the hinges.
8. Align the door to the hinges using the reference marks made during the removal procedure and tighten the nuts and bolts to 23 Nm (17 ft. lbs.)
using the sequence shown.
9. Adjust the door if needed. See: Adjustments
