Dakota 2WD V8-4.7L Flex Fuel (2009)
Rear Door Panel: Service and Repair
Rear Door Trim Panel - Installation
Rear Door Trim Panel
INSTALLATION
1. Position the trim panel (3) and connect the inside handle actuator rod (9).
2. Connect the electrical connectors (6).
3. Lift the trim panel up and onto the lock rod (1) and attachment hooks (7).
4. Install the lower screws (6).
5. Install the screw (5) from the pull cup.
6. Install the screw (4) at the interior handle.
7. Position the close out panel (2) and seat the fastener clips fully.
8. Install the manual window crank handle (2), if equipped.
9. Connect battery negative cable.
Rear Door Trim Panel, Cargo
INSTALLATION