Dakota 2WD V8-4.7L Flex Fuel (2009)
1. Position the tapping plate (1) into the b-pillar.
2. Install the striker (2) and install the bolts (3).
3. Tighten the bolts to 28 Nm (21 ft. lbs.).
4. Adjust the striker if needed. See: Adjustments/Door Latch Striker - Adjustments
5. Install the lower c-pillar trim (7). See: Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim Panel-Installation
Rear Door Lower Latch Striker - Removal
REMOVAL