Dakota 2WD V8-4.7L Flex Fuel (2009)
Hood Sensor/Switch (For Alarm): Service and Repair
Vehicle Theft Security Hood Ajar Switch - Installation
INSTALLATION
1. Position the hood ajar switch (2) near the mounting hole (1) in the left outboard end of the cowl plenum cover/grille panel.
2. Reconnect the wire harness connector (3) to the switch connector receptacle.
3. Insert the switch into the mounting hole until the integral switch latch tabs lock it into place.
4. Reconnect the battery negative cable.
5. Close and latch the hood.