Dakota 2WD V8-4.7L Flex Fuel (2009)
Wheel Cylinder: Service and Repair
Removal
REMOVAL
1. Install prop rod on the brake pedal to keep pressure on the brake system, Holding pedal in this position will isolate master cylinder from hydraulic
brake system and will not allow brake fluid to drain out of brake fluid reservoir while brake lines are open. This will allow you to bleed out the
area of repair instead of the entire system.
2. Remove wheel and tire assembly.
3. Remove brake drum.
4. Remove brake shoe return spring (3) and move shoes out of engagement with cylinder (1).
5. Disconnect wheel cylinder brake line (4).
6. Remove cylinder (2) attaching bolts (3) and remove cylinder from support plate (1).